Overview
Washing machines plays a brief melody upon completion of the wash program. Press the Signal in order to alter the volume of that melody and sound notification between low, medium or high. It can also be turned completely “off” if desired.
Unlike the image above the Signal button might be classfified as an Extra Function in some models. In cases such hold the Signal button for at least 3 seconds
WashTowers
Generally on WashTowers in order turn the melody and button tones on or off, press and hold the Extra Rinse button on the washer or the Reduce Static/Wrinkle Care button on the dryer for 3 seconds.
Model WKGX201HBA, WSEX200H*A, WKE100HWA
Washer
Dryer
Note : On some models the signal function may be placed on the Wrinkle Care button.
Front Load Washers
Recent front load washing machines feature limited ON/OFF SIGNAL options waiving off any additional volume adjustments. Some examples are the following :
Model WM6700H*A
Other Example Model No. WM3400CW
Press and hold the COLD WASH button for three good seconds to toggle Signal Notification sound between ON and OFF.
Top Load Washers
Example Model No. WT1101, WT1201
Example Model No. WT7200C
Washer/Dryer Combo
Regrettably, not all Laundry appliances feature the option of adjusting the Signal Chimes. Washer/Dryer combination units for example, due to real estate limitation on the control panel, had to waive off the Signal adjustment feature to accommodate Drying cycles as shown in below description.
Other models, such as the WM3488H* washer/dryer combination, feature the Signal ON/OFF adjustment as a secondary function option under MAIN button called “Water Plus”. Customers need to press and hold that button for at least 3 seconds to enable or disable Chime Signal Sound. There are no further adjustment for volume.
Model WM3488H*
SideKick Washers
As for any of the SideKick™ pedestal washers, regrettably, adjusting melody and button tone Signal option is not featured on those units. Some SideKick™ pedestal washer customers have expressed their concerns wishing to completely disable sound notification so we have forward such request to the factory for review in the hope of a resolution.
Laundry Dryers
For Newer Models :
-
Press the
Options button.
-
Turn the knob to select
Additional Settings and press the
✓(
OK) button.
-
Turn the knob to select the desired setting and press the
✓(
OK) button.
-
Turn the knob to select or change the setting and press the
✓(
OK) button to save the setting.
-
To return to the previous screen, press the
Options button again or press the
⟲(
Previous) button.
For Models : (DLEX4200*, DLGX4201*, DLEX3850*, DLGX3851*, DLEX4500*, DLGX4501*)
- To turn on/off the melody and button tones, press the Signal button.
- When this function is turned on, the On/Off LED on the display lights up.
For Models : (DLE3600*, DLG3601*)
- To turn on/off, press and hold the Wrinkle Care button for 3 seconds.
For Models : (DLE3400*)
To turn on/off, press and hold the Dry Level button for 3 seconds.
When this function is turned on, On/Off LED on the display lights up.
For Models : (DLHC1455*)
To turn on/off, press and hold the Less Time and Custom PGM buttons for 3 seconds at the same time.
When the signal is muted,
lights up on the display.
For Models : (DLE7100*, DLG7101*, DLE7150*, DLG7151*, DLE7000*)
Damp Dry Signal
When this option is selected, the dryer signals when the load is approximately 80% dry. This allows you to remove faster-drying lightweight items or items that you would like to iron or hang while they are slightly damp. (Models: DLEX4200*, DLGX4201*, DLEX3852*, DLEX4500*, DLGX4501*)
- For above listed models: turn Damp Dry Signal on/off by pressing and holding down Dry Level button for 3 seconds.
- For models (DLE3600*, DLG3601*): turn Damp Dry Signal on/off by pressing Damp Dry Signal button.
- For models (DLE3400*, DLG3401*): turn Damp Dry Signal on/off by pressing and holding down Time Dry button for 3 seconds.
Article Feedback
Article Feedback