Installing additional Music Flow speakers

Installing additional Network speakers to Application

Before Installing

• Prior to adding more speakers, please ensure that at least one speaker is completely set up. It is highly recommended that the first installed speaker, considered the main speaker unit, be hardwired to the network AP router.

How to setup

How to install additional speakers

• Open the Music Flow player application on your smart device. Select [ ] and go to [Connected Speakers] to confirm that at least 1 speaker is successfully installed.
• Select [ ] to start the install guide → press [ ] to add more speakers.
• Follow the instructions as provided in Music Flow Application
  
  
  
  
  
• Tap NEXT button at the bottom right to proceed.
  
  
  
• When prompted to press the ADD button at the back of the speaker just press and release. If you PRESS & HOLD two beeps will sound informing you speaker has just been reinitialized which is not what you want. Wait for the flashing red LED then tap NEXT.
  
  
  
• Before completing by tapping [NEXT] button at the bottom, should you be installing a good number of speakers, it is recommended you tap in the [Music Flow 1] text box and provide that speaker a specific name for identification purposes then tap the [Add product to connect] button to proceed to next speaker. Keep repeating until all speakers connected and listed.
  
  Note There can only be 2 smartphone devices operating music flow speaker configuration on one same network at any given time. This also applies to new users wishing to set-up. For a third individual to set-up, on of the other two smartphones must disconnect from the network or be turned "off" completely.
  If you can't install additional speakers, follow below instructions
  

  • If the speaker is placed too far from the router, move the speaker closer to the router.
  • Reset the speaker before attempting to install it a second time around.
  How to reset speaker

  • Press and hold “ADD [ ]” button until it beeps twice.
  • For sound bar, "RESET" message will appear in the display window.