We use cookies, including cookies from third parties, to enhance your user experience and the effectiveness of our marketing activities. These cookies are performance, analytics and advertising cookies, please see our Privacy and Cookie policy for further information. If you agree to all of our cookies select “Accept all” or select “Cookie Settings” to see which cookies we use and choose which ones you would like to accept.
Issues with Interior Light
It is important to determine the type of issue you are experiencing with interior lights to see if troubleshooting can resolve it.
Lights Do Not Stay On
If none of the lights inside the unit will turn on when the door is opened, check the following:
- Identify whether the unit is cooling.
- Check the door switches to see if anything is covering them, such as tape or other packing material. Push in and out on the door switch to see if the light turns on. If the light turns on, it is possible the door was not shut all the way and light timed out.
If only specific lights are not working, this likely indicates that the bulb itself is not installed properly or needs to be replaced.
- Incandescent Bulbs: Remove and replace the bulb, making sure that it is screwed in completely.
- LED Bulbs: If any of the LED lights are out, these require replacement by a technician.
Lights Turn Off With Door Open
After being on for 7 minutes, the lights will shut off automatically. Shut the door for a few minutes and reopen them to see if the lights come back on.
In the fresh food compartment of the refrigerator, the light has its own thermal protector to prevent the light from overheating. If the temperature around the light goes above a certain temperature, the light turns off automatically. If this occurs, the doors should be shut for 10 minutes to allow the light to cool down. Once it cools back down, the light should come back on.
This might occur in less than 7 minutes, depending on how often the doors are opened and closed in a short period of time.
Lights Stay On
Open the door and manually press in on the door switch. Do this for each switch. If the lights will not turn off when the door switch is pressed in, service will be required.
- Find your switch. It is activated when the door shuts on it, so it is visible even when the door is closed. It will be situated somewhere along the refrigerator's internal structure. Remove the door switch once you've found it. A single screw may hold the door switch inside its enclosure. If you can't find a screw keeping the door switch in place, pry out the mechanism with a putty knife or another thin flat instrument. Place a strip of tape down the edge of the putty knife to prevent it from scraping up the inside of your fridge.Pull the switch out far enough to reveal a few inches of the attached wires.
- Some refrigerator door switches operate both the light and the fan. If your door switch just controls the interior light, it will be connected to two wires. If it also controls the fan, four wires will be connected to it. You will remove each of the wires you locate, but first name them so you know which one goes where when you reattach them. Remove the wires from the switch with care. You don't want to risk harming the wires by pulling on them directly. Pull on the connectors instead.
- 3.Keep the multimeter on X1 if your switch has four connections. Touch one lead to a terminal, then use the other lead to touch each of the remaining three terminals one at a time. When the second lead touches one of the other three terminals, the multimeter's reading should shift from infinity to zero. When this occurs, the two terminals become a pair. Keep the leads in contact with the terminals and press down on the switch. The multimeter's reading should return to infinity. In the same manner, test the other pair of terminals. If the findings of either set of terminal tests differ from those shown below, your door switch should be replaced.
Check for Loose Connections Under Door Hinge
Using a Phillips screwdriver, remove the door hinge cover on one side. Check the connections one at a time by unplugging and plugging them back in. Repeat the process with the other door hinge, removing it and checking the connections one at a time. Check the magnetic sensor door switch once again to determine whether interior light turns OFF. If unsuccessful, the refrigerator will require a repair service.
This guide was created for all refrigerator model types. Images or content presented herein may differ from your product.