F-2 Error code appearing on the range's control panel display
- Should the LG electric range be beepingalerting the customer to some malfunction seek error code
- If control panel display lights up error code "F-2" it indicates door locking system not operating!
- Have customers press the Clear/Off button to terminate the beeping alarm
- Try to reset the unit by either unplugging the range or switching circuit breaker to off position
- Advise the customer to leave it "as is" for 3 to 5 minutes then re-plug or switch breaker back "on"
- Either therage has been reset and will operate normally moving forward or if the "F-2" error code persist, a service techinician will need to be dispatched
Accidental futility of Error Codes
No question the induction of electronic components in major appliances has allowed manifacturers to fine tune utilization of these devices and optimize their performance. On the other side of the coin adverse effects of residual electiriciy inadvertently finding its way to any capacitor on a printed circuit board often results in producing a futile error code displayed in the control panel of the appliance. Resetting the appliance resolves these oddball issues. However should the error persist, then services of an authorized technician will be required as there is an obvious problem with the appliance.
Note :
F2 error code on a range pertains to the oven temperature
sensor also known as the thermistor. F2 indicates thermistor has
short-circuited therefore not operational. It does not necessarily imply the
thermistor is at fault. The wiring harness might be at cause. A qualified
service technician will need to have a look, determine faulty part then replace
or repair it.
Should the range deemed to require a repair service, please visit our
In-Warranty Service Repair Request or, please consult our webpage offering
Past 1st Year Warranty FLAT RATE repair service program designed to eliminate the guess work of an estimate.
