Front load washers are designed for High Efficiency performance and as such utilize less water and detergent and consume less power. Not unlike any other high performance equipment, greater care is required to ensure optimized operability of these machines.
It has been observed and commented that some folks had encountered disagreeable experiences with their front load washers, notably smelly odors escalating to mildew and mold. Due to the low level of water utilized, wash residue such as grime, dirt, etc. along with detergents and softeners don’t always drain completely out of the tub.
Residue coming from detergent soaps that causes over-sudsing can accumulate in the rubber door gasket and over time mildew is formed. Mildew develops on damp surfaces that have experienced water build-up that has not dried properly. Mildew will start off as splotchy patches of black, green or white and later turn into mold if not taken care of adequately.
In the same fashion as why dish detergent does not work well in a dishwasher which requires specially formulated non-suds forming dishwasher detergent, front loading washer manufacturers all insist that only High Efficiency detergent be used. Regular detergent in a front loading washer would produce way too much suds causing delays and confusion in the washing cycles, making proper rinsing of clothes rather impossible and diminish the washer’s capability at draining itself properly therefore inadvertently setting up the stage for mildew building conditions.
What You Need
Here are some other list of regular household cleaning products that can be used to remove mildew on rubber gasket.
Steps to Clean the Gasket
High Efficiency, or HE, refers to a washing machine that uses 20 to 80 percent less water and energy than standard washing machines. These are typically front-loaders. A logo with the letters HE will appear on the front of detergent packaging suitable for a High Efficiency washing machine.
When you think about it, a High Efficiency front-loading washing machine utilizes up to 80% less water than a conventional top load washer. Putting in the same amount of regular detergent that would normally be required in a top loader would be 5 times too much in a front loading washer. Compound to that the different gravitational pull while draining the wash residue and water, the hermetical flawless design of the door and that has all the making of a disastrous outcome unless good usage, care and maintenance are part of the laundry routine.
When buying a front-loader one should be prepared to give that washer a little extra care to prevent such unfortunate situation by adhering to manufacturer recommendations regarding running the cleaning cycle, using only HE detergents and following these below tips and to prevent any issues from developing. The LG has a tub clean cycle and during this cycle it spends a lot of time spraying water through the door seal area.
Regrettably, some customers come across this invaluable information way too late in the mildew buildup development stage. The amount of time required spent at scrubbing away disinfecting the rubber gasket material might outweigh the cost of simply getting boot gasket replaced by an expert certified repair technician.
A customer once reported back from having chosen to replace a worn-out boot gasket on their front load washing machine by themselves that, in hindsight, they would have better off to have benefited from LG Electronics ONE Price program. The amount of time spent at completing the task, not to the mention the aggravation from stepping away from their comfort zone, would have been more constructive and beneficial used at their own skillsets. The loss of wages from time away handling the disassembly & reassembly of the washer, wound up costing them more then having a certified repair technician in the house fixing the washer.
Internet research will substantiate that mold & mildew are not an isolated case dealing with front load washers. For example, mold can easily be found on shoes in your closet. There is an interesting reading material addressing that very particular issue and it goes through some similar situations causing both front load washers and shoes mold affliction.
Should you be considering getting the rubber boot gasket replaced on your washing machine, please consult our webpage offering Past 1st Year Warranty FLAT RATE repair service program designed to eliminate the guess work of an estimate.
Your email has been successfully registered.
The restocking notification has already been updated.
Add items to your MY LG wishlist
OTP authentication failed. Please verify your mobile number to use for mobile OTP login.
