FIRMWARE UPDATE PROCEDURES
How to Update Firmware
Firmware (or software) updates are available for download for any network enabled Smart TV.
TV firmware updates come by as required to improve viewing, browsing and content experience.
Note : Network connection is required to download any firmware updates.
Firmware update notifications will appear on the TV if the Software Update has been set.
Otherwise refer to the following directions to check whether an update is available for the TV.
1. Press the Smart button on the remote controller.
Select Settings > SUPPORT > Software Update, then press WHEEL or ENTER.
2. The current version appears on the menu.
To see if a new version is available, select Check Update Version,
then press WHEEL or ENTER.
If Automatic update mode is on, a new version is automatically downloaded.
To prevent the TV searching for updates, set Software Update to Off.
3. Check Update Version returns a message showing either
a new version is available or no update is found.
To download the new software update, select Update then press WHEEL or ENTER.
4. During download, the status bar will show progress.
When the software has been successfully downloaded and updated on the TV,
a message appears.
5. After the message appears indicating that the software has been
successfully downloaded, turn off the TV and back on
to install the update.