Individual sound bar speaker volume settings

Sound projected directly at viewers will produce a somewhat adequate audio experience.

Note Customers seeking more explicit descriptions of the sound bar remote controller buttons can find the information under more appropriately titled article “Sound Bar – Remote Controller Functions”.

Sound that bounces off the surroundings and calibrated to enhance the sounds reproduction from the room’s electroacoustics will provide a greater immersive surround sound experience.

Customers can manually adjust individual speaker volume to optimize the spatial imagery or rely on the Artificial Intelligence Room Calibration feature from the LG Sound Bar phone application.

Manually adjusting individual speaker volume is done by the pressing the SOUND TUNING button on the remote controller.

This adjusts the sound level of the connected speaker. Press the Sound Tuning button and then Left/Right button to select the desired speaker before you press the Up/Down button to increase/decrease the sound volume (graphic Equalizer slider icon).

Status Display Table
Status Display	Connected Speaker	Adjustable Range
WF	Subwoofer	from -15 dB to + 6dB
C	Subwoofer	from -6 dB to +6 dB
OVC	Top Firing Speakers	from -6 dB to +6 dB
S	Side Speakers	from -6 dB to +6 dB
R	Rear Speakers	from -6 dB to +6 dB
TRE	Front Speaker (treble)	from -5dB to +5dB
BAS	Front Speaker (bass)	from -5dB to +5dB

Note Depending on the sound bar model, there are variations to the Sound Tuning instructions. For example, sound bar model number S45T Sound Tuning instructions and terminology as stipulated in the owner manual:

Sound tuning

You can adjust the sound level of each speaker and sound tone

Press Sound Tuning button. The product enters the setting mode and displays the current level of the product.
Press Left/Right button to choose the speaker you want to adjust.
Press Up/Down button to adjust the sound level.

Subwoofer (-15 ~ 6)

Rear, Treble, Mid, Bass (-6 ~ 6)

If you press Up/Down button even when the level has reached the maximum or minimum, the current function LED will blink 3 times

The following is an Equalizer Slider example that has come to be considered the perfect sound setting.