Cleaning filter on room air conditioner unit
Clean Filter
The Clean Filter LED lights up to notify you that the filter needs to be cleaned. After cleaning the filter, press Temp ▲ and ▼ together on the control panel to turn off the Clean Filter light.
Note
- After cleaning the filter press Temp ▲ and ▼ together on the control panel to reset the LED light. The LED light turns on after 250 hours of operation.
- The filter reset must be done using the control panel, not the remote control.
- This feature is a reminder to clean the air filter for more efficient operation. The LED light turns on after 250 hours of operation.
Warning
Before cleaning or performing maintenance, disconnect the power supply and wait until the fan stops.
Air Filter
Check the air filter at least twice a month to see if cleaning is necessary. Trapped particles in the filter can build up and block the airflow, reducing cooling capacity and causing an accumulation of frost on the evaporator.
Cleaning the Air Filter
- Remove the air filter from the front grille by pulling the filter forward and then up slightly. Removing air filter from the front.
- Wash the filter using lukewarm water below 40°C (104°F). Cleaning filter under lukewarm water
- Gently shake the excess water from the filter then put it back into place.
