Cycles and Options [Top Load Washer - Model WT6105CW]

1. Power On/Off Button
• Press this button to turn the washer on or off.
• Pressing this button during a cycle will cancel that cycle and any load settings will be lost.
• The door will unlock after a brief pause.
Note
If there is any water remaining in the drum after the washer shuts off, it will drain after a delay. The washer can be restarted at any time before the drain begins. However, once the water begins to drain, all functions will be suspended until the water has been completely drained and the washer shuts off.
2. Cycle Selector Knob
• Turn this knob to select the desired cycle.
• Once the desired cycle has been selected, the standard presets will appear in the display. These settings can be adjusted using the Cycle Modifier buttons at any time before starting the cycle.
3. Start/Pause Button
• Press this button to start the selected cycle.
• If the washer is running, use this button to pause the cycle without losing the current settings.
Note
If the Start/Pause button is not pressed to start the selected cycle, after a delay the washer automatically turns off and all cycle settings are lost. Any water remaining in the drum will be drained.
4. Status Display

1. Cycle Status Indicators
• These LEDs blink when you select a cycle, showing which stages (e.g. Wash, Rinse, Spin) are included.
• During operation, the LED for the current active stage blinks, while the LEDs for upcoming stages glow steadily.
• Once a stage finishes, its LED turns off. If the cycle is paused, the active stages LED stops blinking.
2. Door Lock Indicator
• This indicator lights up when the cycle starts and the door is locked.
• The indicator light stays on until the cycle is paused, stopped or has finished.
3. Control Lock Indicator
• This indicator lights up when the control panel is locked.
• When this function is set, all controls are disabled except for the Power button.



5. Cycle Modifier Button

Each cycle has default settings that are selected automatically. You may also customize these settings using the cycle modifier buttons.

• Repeatedly press the button for the desired modifier until the indicator light for the desired setting is lit.
• This is a high-efficiency washer, and the water levels may be much lower than you expect. This is normal, and cleaning/rinsing performance will not be compromised.
• Press the button to adjust the setting.

1. Temp.

Make sure the water temperature is suitable for the type of load you are washing.
• Press the Temp. button repeatedly to select the wash temperature combination for the selected cycle.
• All rinses use unheated cold water.
• Cold rinses use less energy. The actual cold rinse temperature depends on the temperature of the cold water at the faucet.
Note
• The LED next to the setting lights up when the setting is selected.
• To protect your garments, not every wash temperature or option is available with every cycle.
• A chime will sound twice and the LED will not light if the desired setting is not allowed for the selected cycle.
• Follow the fabric care labels on the garment for best results.
6. Option and Extra Function Button

Your washer includes several additional cycle options to customize cycles to meet your individual needs.

• Select the desired option after selecting the desired cycle and settings
Note
• The LED for the option will light when the option is selected.
• To protect your garments, not every option is available with every cycle.
• A chime will sound twice and the LED will not light if the selected option is not allowed for the selected cycle

1. Rinse+Spin

Select this option to rinse and spin a load separately from a regular cycle. This can be helpful in preventing fresh stains from setting in fabrics.

• Press the Power button to turn on the washer.

Do not select a cycle.

• Press theWater/Rinse button repeatedly to select the Rinse+Spin option.
• Press theStart/Pause button to begin.
2. Deep Fill

Adding Extra Water

For better wash performance, press the Water/Rinse button repeatedly to select Deep Fill before starting a cycle to add extra water to the cycle.

Note
• Using the Deep Fill option increases the cycle time because of the added fill time required.
• To add water during a cycle, pause the cycle before selecting Deep Fill.
• If the washer has already reached its maximum fill level, pressing Deep Fill has no effect.
• If you add the Deep Fill option to the Normal cycle, it automatically changes to the Deep Wash cycle before starting. You cannot select the Deep Fill option for the Normal cycle.
3. Extra Rinse

This option adds an extra rinse to the selected cycle. Use this option to help ensure the removal of detergent or bleach residue from fabrics.

• If a liquid fabric softener is used, it is always dispensed in the final rinse.
Note Selecting the Extra Rinse option with the Normal cycle automatically changes the cycle to the Deep Wash cycle.
4. Control Lock

Use this function to disable the controls. This function can prevent children from changing cycles or operating this washer.

• The function does not lock the door.
• Once this function is set, all buttons are locked except the Power button.
• When the controls are locked, Control Lock LED light up during the wash cycle.
• Turning off the power will not reset this function. You must deactivate this function before you can access any other options and functions.

Locking the Control Panel



• Turn on the power.
• Press and hold the Water/Rinse button for 3 seconds to activate this function. The Control Lock LED will light up

Unlocking the Control Panel



• Turn on the power.
• Press and hold the Water/Rinse button for 3 seconds to deactivate this function.

  When this function is deactivated, a chime will sound and the LED turns off.

The wash cycles are designed for specific types of wash loads. Select the cycle that best matches the load contents for maximum wash performance and fabric care.

Cycle Guide

Turn the knob or press the button to select the desired cycle. When you select a wash cycle, the light for the corresponding wash cycle will turn on.