An ultra-wide LED display installed in a hanging configuration from the ceiling inside an airport is showing flight information and gate directions, while a woman is looking up at the screen.
* All images in this page are for illustrative purposes only.
Experience the convenience of LG’s LED All-in-One LUPA098, featuring an ultra-wide 32:9 aspect ratio for an immersive viewing experience. This all-in-one package includes an embedded controller and built-in speaker, making setup a breeze. Dispelling the notion that LED displays are difficult and complex to install, it requires no controller connections or module configuration.
The wide LUPA098 screen suspended inside an airport terminal is displaying flight information and a travel advertisement simultaneously, with sound delivered through its built-in speaker.
The installation process of the 32:9 All-in-One is straightforward. First, fix the rear frame on the mounting accessory. Next, attach each LED display module to the rear frame, and finally, plug in the power cable. This simple installation saves time and labor, allowing users to easily manage the LED screen.
This consists of a total of three images illustrating the steps for securing cabinets, attaching LED modules, and connecting the power cable.
* Fixing screws or installing wall mount/accessories is needed additionally.
** Installation time and complexity may vary depending on various factors, including number of installers, their skills and experience and the conditions of the location and environment.
The LUPA098 is operated with Single AC cable without the need for a complicated power connection and enables neat installation.
In case of a failure related to the LED module or the system board, it can be serviced from the front. The LED module can be easily detached using the provided magnetic tool and replaced quickly without cabling.
* Certain failures may not be serviceable from the front, and alternative disassembly procedures may be required.
** With the safety wire applied, extra wiring is required during LED module installation or replacement.
The product supports flexible installation through its VESA‑compatible mounting holes, allowing the use of a wide range of commercially available wall mounts and stand tailored to your installation needs. Additionally, the LUPA098 can be seamlessly arranged side by side in an N × M configuration, supporting up to 10 screens to suit various installation sites and purposes.
The LUPA098, installed on a wall with a landscape wall mount, on a stand, and side by side as four displays in a multi-screen setup, is shown in three different images.
* Wall mounts and stands are not provided. Any VESA‑compatible options may be purchased separately as needed.
** Using the accessory hanging rings for wire installation does not allow vertical expansion; only a 1 × N installation is supported.
The LUPA098 has satisfied the standards for the BS476 Part 7 Class 1 rating, confirming its compliance with flame spread standards. Its excellent fire resistance can help improve safety at the installation site.
* The LUPA098 was evaluated for spread of flame at 1.5 min and final spread of flame under BS476 Part 7:1997 (R2016) procedures, verified by TUV SUD Certification and Testing (China) Co., Ltd. in December 2025, and satisfied Class 1 standard requirements. (Technical Report No. 68.189.24.0712.01).
The LUPA098 is designed to be resistant to fire.
** Actual results or performance may vary depending on the use environment.
The LUPA098 is designed to function at altitudes of up to 5,000 meters. To support this capability, the original power supply unit (PSU) on the power board was replaced with a PSU optimized for high-altitude performance.
The LUPA098 operates smoothly at altitudes of up to 5,000 meters.
* Actual results or performance may vary depending on the use environment.
Model name
LUPA098
Pixel Configuration
Single SMD
Pixel Pitch (mm)
1.25
Module Resolution (WxH)
240x135
Module Dimensions(WxH,mm)
300x168.75
No. of Modules per Screen (WxH)
8x4 (Total 32)
Screen Resolution (WxH)
1,920x540
Screen Dimensions (W x H x D, mm, including bezel)
2,405 X 680 X 59.35
Screen Surface Area (㎡)
1.62
Weight of the screen
38.9
Physical Pixel Density (pixels/㎡)
640,000
Flatness of Cabinet (mm)
±0.15
Cabinet material
Aluminum
Service access
Front
Brightness (After Calibration, nit)
Typ. 600
Color Temperature
3,200~9,300
Visual Viewing Angle (Horizontal)
150
Visual Viewing Angle (Vertical)
150
Brightness Uniformity
0.98
Color Uniformity
±0.015CxCy
Contrast Ratio
3,000:1
Processing Depth (bit)
16
Power Consumption (W/Screen, Max.)
540
Power Consumption (W/Screen, Avg.)
276
Power Consumption (W/㎡, Max.)
333
Heat Dissipation (BTU/h/Screen, Max.)
1,842
Heat Dissipation (BTU/h/Screen, Avg.)
942
Heat Dissipation (BTU/h/㎡, Max.)
1,136
Power Supply (V)
100 to 240
Frame Rate (Hz)
50 / 60
Refresh Rate (Hz)
3,840
LED Lifetime (Half brightness)
100,000
Operating Temperature(℃)
0℃ to +40℃
Operating Humidity
10~90%RH
IP rating Front
IP30
IP rating Rear
IP30
Certification
CE,FCC,ETL,CB, EMC Class A, BS476: Part7 Class 1, EN13501-1 (Class B-s1,d0)
Environment
RoHS, REACH
Speaker
Built-in (9W+9W)
I/O Port
HDMI In(3), DP In(1), USB, LAN, RS232C In/Out, IR, Digital Audio Out (1, SPDIF Optical)
Controller
Embedded(webOS)
To access more technical documentation and downloads, please visit the LG B2B Partner Portal.
Your email has been successfully registered.
The restocking notification has already been updated.
Add items to your MY LG wishlist
OTP authentication failed. Please verify your mobile number to use for mobile OTP login.
