What is Absorption Chiller Hot Water Type

LG Absorption Chiller Hot Water Type refrigeration cycle diagram is displayed. LG Absorption Chiller Hot Water Type refrigeration cycle diagram is displayed.

Hot Water Type

LG Absorption Chiller Hot Water Type provides cooling and heating using heat instead of electricity, making it ideal for locations without electrical infrastructure. It is especially suitable for use near factories or power plants.

New Chiller Controller

The 15” large touch screen enhances visibility and operability, supporting functions such as run history, system information, scheduling, and reporting. This interface is also available for the Absorption Chiller.

High Energy Efficiency

The Absorption Chiller Hot Water Type enables efficient and cost-effective operation, with its improved Part Load Efficiency (IPLV). It achieves an IPLV of 0.95, delivering enhanced operational performance.
* Compared to the LG WC2H Series(2H Type) and the LG WCMW Series(MH Type) based on the KS B 6271 Standard. The value was measured under cooling water conditions with a chilled water outlet temperature of 7°C.

Reliable & Stable Operation

  • Connection method between the product and AI Engine is demonstrated.

    Absorbent Concentration Control

    Equipped with self-diagnostic and safety controls, the Absorption Chiller Hot Water Type monitors absorbent concentration using key temperature indicators. When levels exceed the set threshold, it engages inlet heat control and crystallization prevention.

  • Refrigerant flows down the Falling Film evaporator with a structural diagram on the right.

    Gravity Loading Dropping Type

    Unlike Spray Nozzle Type, Gravity Loading Dropping Type drip refrigerant over tubes using tray and distributor. It eliminates the risk of sludge buildup in the holes. And it also does not require a spray pump, Allowing for simpler and more stable operation

Convenient Maintenance

  • The Product separates into three parts, demonstrating transportation and maintenance convenience.

    3 Sectional Partition

    The LG Absorption Chiller is designed with a multi-sectional structure, making it easier to transport and maintain. Its modular design allows it to pass through narrow or confined building spaces, providing installation even in tight environments.1)

  • Easy Piping Cleaning

    When pipe cleaning is needed, simply opening the water box cover is sufficient. With this simplified structure, maintenance is easier and requires no additional disassembly or insulation work. The Water Box enables convenient access for maintenance and cleaning of the heat exchange tubes.

1) It may vary depending on the usage environment.

Applications in Industries

LG Absorption Chiller delivers high-performance cooling for various industries for commercial building, shopping mall.
Multiple LG Absorption Chiller Hot Water Type units are displayed. Multiple LG Absorption Chiller Hot Water Type units are displayed.

LG Absorption Chiller Hot Water Type Lineup

* The above range is based on the nominal tonnage at AHRI condition.
* Capacity above the lineup is appicable through design review

FAQs

Q.
What are the lineup, refrigerant type, and features of LG Absorption Chiller Hot Water Type?
A.
(1) Lineup
- 80 ~ 1,350usRT(WCMH)
- 80 ~ 2,000usRT(WC2X)
- 80 ~ 2,000usRT(WC2H)

(2) Key Features
- Conveninent installation & control with reduced size and new chiller controller
- High energy efficiency
- Reliable and stable operation with absorbent concentration control, falling film type evaporator
- Convenient maintenance with 3 sectional partition and easy piping cleaning
Q.
Why LG Absorption Chiller Hot Water Type?
A.
LG Absorption Chiller Hot Water Type can be applied to various verticals that require chilled water by using hot water as the heat source.
Q.
Where is it usually used?
A.
LG Absorption Chiller Hot Water Type is used in commercial buildings, shopping malls to provide cooling. It is especially effective in locations with limited or unreliable electrical supply.
Q.
Does it have features to prevent crystallization, freezing, or leakage?
A.
Yes, the LG Absorption Chiller is equipped with features that provide reliable and stable operation. In particular, it prevents crystallization, freezing, and leakage through absorbent concentration control, enabling continuous and consistent performance.

Discover More about Absorption Chiller Hot Water Type